全自动造型机的安全操作规程： Safe operating procedures of automatic molding machine: 　　1、恪守全自动造型机通用操作规程。 1. Abide by the general operating rules of automatic molding machine. 　　2、全自动造型机起模时，顶杆有必要平稳而又同步上或，不然，告诉修补人员修补。 2. When fully automatic moulding machine, it is necessary to smooth and synchronise the top pole, or tell the patter to fix it. 　　3、全自动造型机压实时，压砂横梁转架应平稳地滚动，不要操作过猛，发作冲击。 3. The automatic molding machine is pressed in real time. The roller should be rolled smoothly. 　　4、操作者在出产前后有必要留意模具是不是杰出，外模与芯模的定位销是不是配套。 4. It is necessary to pay attention to whether the mould is outstanding before and after the production, and the positioning and pin of the external mould and the core mould are matched. 　　5、操作全自动造型机的作业人员应思维会集。 5. The operator of automatic molding machine should set the thought meeting. 　　6、全自动造型机合箱完工后，应按技能规则，将模子吊搬到制定的浇注点（线）。摆放规整，并加以压铁或卡子锁箱。杂件有必要注明记号。 6. After the completion of the fully automatic molding machine, the module shall be transferred to the developed pouring point (line) according to the rules of skill. Place the rules and press the iron or clamp box. The miscellaneous parts need to be marked. 　　7、全自动造型机砂箱禁绝堆积太高，通常不得超越两米，所用东西有必要堆积规整，避免发作事端。 7. Automatic molding machine sandbox must not be piled too high. It is usually not to exceed two meters, so it is necessary to pile up the rules and avoid any trouble. 　　8、运用喷灯时应留意安全，避免火灾发作，运用行灯有必要是36V以下低压灯泡，禁用220V以上高压灯泡。 8. When using the burner, you should pay attention to the safety and avoid the fire. It is necessary to use the light of the lamp to be a low-pressure bulb under 36V, and disable the high pressure bulb of 220V above. 　　9、全自动造型机运用行车时应先查看吊具是不是杰出，起吊时应将钩子扎牢链条拉直，禁绝斜吊和超负荷起吊。 9. The fully automatic molding machine should check whether the hoisting equipment is outstanding when using the crane, and when lifting, the hook should be fastened to the chain straighter, and the hoisting and overloading are forbidden. 　　10、禁止在起吊砂箱下面修模操作。大型砂箱开箱，翻身垫箱时有必要用方形物件垫妥。 10. It is forbidden to repair the mould under the lifting box. Large sandbox open box, the need to use square object mat. 　　11、全自动造型机运用的砂箱有必要牢固，搭手要完好无裂纹和曲折景象。 11. The sandbox used in fully automatic moulding machine is necessary to be strong, and the hand should be free of crack and zigzag scene.