1、造型机造型时检查冷却水系统。2、一周检查水管，气管，油管及电路接头是否松动。3、一周检查地脚螺栓及传动紧固件。4、一月协助电工轻吹电柜灰尘。欢迎光临公司官网5、配合浇注紧密联合，不需要造型时及时通知混砂，以免斗内型砂长时间不用而干燥。6、危及到人生安全或设备损坏时，红色按急停按钮。7、造型机设备运行出现异常停顿时，按中停;然后参看故障查询。8、造型机出现故障必须通知电炉及混砂。

1. Check the cooling water system when molding machine modeling. 2, one week to check whether the pipe, pipe, tubing and circuit joints are loose. 3, one week inspection of anchor bolts and transmission fasteners. 4, assist electrical cabinet dust blowing january. Welcome to the company's official network 5, with the combination of close casting, without the need for modeling timely notification of sand mixing, so that in order to avoid dry in the bucket for long time. 6. When the safety of life is endangered or the equipment is damaged, the red button is pressed. 7, when the equipment of the molding machine has abnormal pause, it is stopped by the middle, and then the fault is checked. 8, the failure of the molding machine must be informed of the electric furnace and the mixed sand.