1、液压造型机在使用的过程中，一定注意不能开空车，有一定在有承载物体的情况下进行试运行，随时检查设备运行是否正常，需要做润滑处理的位置要做润滑工作。

1, in the process of using the hydraulic molding machine, we must pay attention to not open empty cars. It must be tested under the condition of carrying objects, check whether the running of the equipment is normal at any time, and do the lubrication work to lubricate.

2、使用时工作人员应该认真观察其运转的情况，在操作中经常清理配件之间的砂粒，不能出现各润滑部位粘砂的现象。

2, when using, the staff should carefully observe its operation and clean up the sand between the parts regularly, so that the phenomenon of sticking to the lubricating parts can not appear.

3、在运行过程中，开闭手柄气阀时的动作一定要平稳，工作完成后要将工作台清理干净，为下次工作做准备。

3, in the process of operation, the operation of the valve when the handle is opened and closed must be smooth. After the work is completed, the worktable should be cleaned up and prepared for the next work.