1，全自动造型机开始前，全自动造型机应首先检查是否润滑装置的改进，根据预定的加油，检查紧固构件被拧紧时，每个操作手柄处于零位置（间隙），所述阀运动是柔性的，存在或不存在泄漏导管，然后打开阀放手总产品气和水的线。
1. Before the full-automatic molding machine starts, the full-automatic molding machine should first check whether the lubrication device is improved. According to the predetermined refueling, check that each operation handle is at zero position (clearance) when the fastening member is tightened. The valve movement is flexible, there is or does not exist leakage duct, and then open the valve to release the total product gas. And the water line.
情况2中，使用全自动造型机时，全自动造型机操作者应熟悉机械部件，电气部件，动作程序，润滑系统，并且在使用该装置的其它要求。全自动造型机沙压实过程的四个步骤：水龙头，放入RAM，RAM压实放。全自动造型机冲孔过程：表夹紧，顶销上升时，运走烧瓶中，将返回的底盘。
In case 2, when using the fully automatic moulding machine, the operator of the fully automatic moulding machine should be familiar with the mechanical parts, electrical parts, operation procedures, lubrication system, and other requirements of using the device. Four steps of the sand compaction process of the automatic molding machine: the tap is placed in RAM and RAM compaction. Automatic molding machine punching process: watch clamping, top pin rises, remove flask, will return to the chassis.
3，要仔细观察全自动造型机的移动使用时，应总是干净的沙子吹出空气润滑和操作在操作现场的，非粘性的润滑份砂子。
3. To carefully observe the movement of automatic molding machine use, should always be clean sand blowing out air lubrication and operation in the operation site, non-sticky lubricant sand.
4，每次之后要建模工作表干净的开始时间建模工作开展之前，。
4, each time after modeling work table clean start time modeling work is carried out.
5，全自动造型机使用后，处理返回到零（空）的位置，每个阀关闭时，清洁装置，清洁站点，以保持相应的滑动装置（旋转）的清洁和润滑的部分，小心仔细检查工具，模具。
5. After the full-automatic molding machine is used, the treatment returns to zero (empty) position. When each valve is closed, the cleaning device cleans the site to keep the corresponding sliding device (rotating) clean and lubricated parts. Carefully check the tools and molds.
正确使用全自动造型机延长全自动造型机的生活，这是非常重要的。
It is very important to use the fully automatic molding machine to extend the life of the automatic molding machine.