1、班后停机
1. Outage after shift
人们下班后通常需要离开工作，你需要停机。在这种情况下，生产人员要检查全自动造型机，让设备内没有什么材料的碎片。因此，人们可以通过清洗让设备保持清洁度。
People usually need to leave work after work. You need to shut down. In this case, the manufacturer should check the automatic moulding machine so that there is no material fragments in the equipment. Therefore, people can keep the equipment clean by cleaning.
2、暂时停机
2. Temporary shutdown
暂时停机就是指全自动造型机出现什么故障或者人员离开机器，从而使其停止运行。如果有障碍物，则关机需要关闭电源，同时进行正常检查，清理机器故障，从而让其能够正常工作。如果人员离开机器，只要按下暂停开关，就可以保持生产状态。
Temporary shutdown refers to the failure of the automatic moulding machine or the departure of personnel from the machine, so as to stop its operation. If there are obstacles, shutdown needs to turn off the power supply, while conducting normal checks to clean up the machine failure, so that it can work properly. If the personnel leave the machine, they can keep the production status as long as they press the stop switch.
3、长期停机
3. Long-term shutdown
如果全自动造型机没有生产工作，则需要长时间停机。进入这种状态，方便人们可以进行清洗。电源应该关闭，以减少电源的影响。此外，设备内的阀门需要关闭，来保持良好的性能。此外，人们还要清理设备内的材料，清洗润滑油等。
If the full-automatic moulding machine does not work, it will take a long time to shut down. Entering this state, people can easily clean. The power supply should be turned off to reduce the impact of the power supply. In addition, the valves in the equipment need to be closed to maintain good performance. In addition, people also have to clean the equipment materials, cleaning lubricants and so on.