保定市乐通机械设备科技有限公司

1：采用机、电、气、液等一体化控制技术，国际化采购。进口液压、气动、电气元器件，提高了造型主机运行的速度、准 确性与可靠性。 2：人机对话界面: 在界定的使用范围内，可在触摸屏上设定、存储和调整各种技术参数。 3：故障判断功能: 通过一系列传感元件和计算机系统，可诊断主机的一般性故障并报警显示，同时在电气控制上可实现故 障识别以及排除方法的提示。 4：设备具有造型效率高、砂型紧实度高、合型精度高、造型无砂箱、浇注无压铁、配套辅机少、占地面积小、运行噪音低 、劳动强度低、建设投资少见效快等特点。 5：机器正压板底部支撑采用气垫结构，确保精度、延长寿命。

1: adopt the integrated control technology of machine, electricity, gas, liquid and so on, international purchase. The import of hydraulic, pneumatic and electrical components improves the speed, accuracy and reliability of the running of the molding machine. 2: man-machine dialogue interface: within the defined scope of use, various technical parameters can be set, stored and adjusted on the touch screen. 3: fault judgement function: through a series of sensing elements and computer systems, it can diagnose the general faults of the main engine and display the alarm, and at the same time, it can realize fault identification and remove methods hints on electrical control. 4: the equipment has the characteristics of high molding efficiency, high sand compaction, high accuracy, no sand box, no pressure iron, less auxiliary machines, small floor area, low running noise, low labor intensity, less investment and quick construction. 5: the bottom support of the machine press plate is supported by the air cushion structure to ensure the precision and prolong the life.